Connectors And Pin Assignments - Mitsubishi Electric MR-J5 Series User Manual

3.4

Connectors and pin assignments

• The pin assignments of the connectors are as viewed from the cable connector wiring section.
• For the STO I/O signal connector (CN8), refer to the following.
Page 215 USING STO FUNCTION [G] [A]
• For wiring to the I/O signal connector (CN3), securely connect the external conductor of the shielded cable
3
to the ground plate and fix it to the connector shell.
Screw
Cable
Screw
Ground plate
3 SIGNALS AND WIRING
47
3.4 Connectors and pin assignments