Sony MAV-555SS Operation Manual page 91

Wow and flutter Unmeasurable
Headroom 20 dB (or 18 dB, 16 dB, 14 dB, 12 dB, 15
dB, 9 dB, selectable)
Analog input/output
(with optional BKMA-513 installed)
A/D, D/A Quantization
20 bits/sample
Frequency characteristics
20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB,
1 kHz)
Dynamic range 95 dB or more
(1 kHz, emphasis on, 20 bits/sample)
90 dB or more
(1 kHz, emphasis on, 16 bits/sample)
Distortion 0.05% or less
(1 kHz, emphasis on, +4 dBm, 600 Ω)
Cross-talk -85 dB or less
(1 kHz, between channels, 20 bits/
sample)
-80 dB or less
(1 kHz, between channels, 16 bits/
sample)
Input reference level
+4 dBm (+4/0/-3/-20 dBm, selectable)
Emphasis T1 = 50 µs, T2 = 15 µs
(on/off selectable during recording)
Processor adjustment ranges
Video system
Recording level ±3 dB/-∞ to +3 dB, selectable
Chrominance level
±3 dB/-∞ to +3 dB, selectable
Setup/black level
±30 IRE/±210 mV
Hue/chrominance phase
±30°
System phase COARSE: ±30 µs (37 ns steps)
FINE: 0 to +37 ns (0.14 ns steps)
Audio system
Input level -∞ to +12 dB
Output level -∞ to +12 dB
Input connectors
SDI INPUT BNC (2, active loop-through) ×3 ports
Serial digital (270 Mbits/s)
SMPTE 259M/CCIR 656-III
REF. VIDEO INPUT
BNC (2, loop-through)
black burst or composite sync
0. 3 Vp-p, 75 Ω, (automatic termination)*
synchronized load
COMPOSITE VIDEO INPUT
BNC (2, loop-through) ×2 ports
1.0 Vp-p, 75 Ω, (automatic termination)*
synchronized load
(with optional BKMA-513 installed)
AUDIO INPUT (AES/EBU)
CH1/2, CH3/4
BNC (2) ×2 ports
Complies with AES-3id-1995
ANALOG AUDIO INPUT
XLR, 3-pin, male (4) ×2 ports
LOW OFF: -60 dBu, high impedance,
balanced
HIGH OFF: +4 dBu, high impedance,
balanced
HIGH ON: +4 dBm, 600 Ω termination,
balanced
(with optional BKMA-570 (J)
connected)
TIME CODE IN
BNC (1) ×2 ports
0. 5 to 18 Vp-p, 3.3 kΩ, unbalanced
TIME CODE IN (SYSTEM)
BNC (1)
0. 5 to 18 Vp-p, 3.3 kΩ, unbalanced
* When the cable is not connected to the loop-through out
connector, loop-through is automatically terminated (at 75
Ω). When the cable is connected, termination goes off.
Output connectors
SDI OUTPUT BNC (2) ×3 ports
Serial digital (270 Mbits/s)
SMPTE 259M/CCIR 656-III
VIDEO MONITOR OUTPUT (SDI)
BNC (1), with superimposed character
information, SMPTE /CCIR 656-III
COMPOSITE VIDEO OUTPUT
BNC (2) ×3 ports, character
superimposition provided (B only)
1. 0 Vp-p, 75 Ω , negative
synchronization
(when the optional BKMA-513, sold
separately, is installed)
VIDEO MONITOR OUTPUT (COMPOSITE)
BNC (1), with superimposed character
information
1.0 Vp-p, 75 Ω, synchronized load
A-5 (E)
Specifications