Sony MAV-555SS Operation Manual page 60

Item number Display indication
633 INT / EXT
634
635
BI
REC RUN / FREE RUN
REGEN SOURCE
BINARY GROUP
636 REC VITC SELECT R1
637 REC VITC SELECT R2
638 REC VITC SELECT R3
BI
639 REC VITC POSITION R1
640 REC VITC POSITION R2
641 REC VITC POSITION R3
BI
SUB MENU
SELECT 1
SELECT 2
642 PB TC REPLACE P1
643 PB TC REPLACE P2
644 PB TC REPLACE P3
BI
645 PB VITC POSITION P1
646 PB VITC POSITION P2
647 PB VITC POSITION P3
BI
SUB MENU
SELECT 1
SELECT 2
670 LTC SELECT R1
671 LTC SELECT R2
BI
679 PB LTC OUTPUT
BI
701 INPUT SETUP REMOVE R1
702 INPUT SETUP REMOVE R2
BI (only in 525 mode)
704 OUTPUT SETUP P1
705 OUTPUT SETUP P2
706 OUTPUT SETUP P3
BI (only in 525 mode)
3-34 (E)
3-4 Setup
Expansion menu items (Continued)
Settings Description
Determines whether the time code generated by the time code generator, or whether the
externally supplied time code is used for the record time code.
INTERNAL : Time code generated by the Time Code Generator is used.
EXTERNAL : Externally supplied time code is used.
Sets the timing for the start of transfer of the TCG regenerate.
REC RUN : Transfer starts with REC.
FREE RUN : Normal transfer.
Sets the TC for generation of the original TCG.
LTC : Generates from the LTC.
VITC : Generates from the VITC.
Sets the user bit specifications of the time code generated by the Time Code Generator.
000
: Not specified
001 : ISO character
010 : Unassigned-1
011 : Unassigned-2
100 : Unassigned-3
101 : Page/line
110 : Unassigned-4
111 : Unassigned-5
Sets whether the time code can be output from the VITC time generator when recording
is loaded.
on : Switches to the VITC of the time code generator.
off : Records the VITC of the input signal.
Selects two lines to insert VITC during recording.
NTSC : 10 Line .. 16 Line
PAL : 7 Line .. 19 Line
These items select the data that is output as VITC and LTC during playback.
off : Output VITC and LTC from the recorded material.
LTC : Output LTC from the recorded material for LTC and VITC.
TM2 : Output TM2 from the recorded material for LTC and VITC.
These items select two lines for inserting VITC during playback.
(This items are valid only if LTC and TM2 were selected in items 642 to 644.)
NTSC : 10 Line .. 16 Line
PAL : 7 Line .. 19 Line
These items select what to use as LTC input.
SYSTEM TC : SYSTEM TIME CODE .. Selects the system time code.
LINE INPUT : LINE INPUT .. Selects the LTC that is input to each port.
When the configuration is 3 input/1 output, the R3 port is fixed to SYSTEM TIME
CODE.
Selects the player port's LTC output mode.
normal : Outputs the LTC (speed 1x) of the current location.
stop muting : When playback is stopped or paused, LTC output is muted.
These items turn SETUP removal from the recording signal on or off.
off
on
These items specify whether to add SETUP to composite video output.
off
on
: Character set not used.
: 8-bit characters in compliance with ISO646, ISO2022
: Undefined
: Undefined
: Undefined
: SMPTE262M Page/Line Multiplex System
: Undefined
: Undefined
.. 18 Line .. 20 Line
.. 21 Line .. 22 Line
.. 18 Line .. 19 Line
.. 21 Line .. 22 Line