Table of Contents
Advertisement
Item number Display indication
001
PREROLL TIME
BI
002 *
CHARACTER H-POSITION
BI
003 *
CHARACTER V-POSITION
BI
005
DISPLAY INFORMATION
BI
SELECT
006
LOCAL FUNCTION ENABLE
BI
007
POSTROLL TIME
BI
008
ANALOG MONITOR
BI
SUPERIMPOSE
009 *
CHARACTER TYPE
BI
010
– 525/625
SUB MENU
EXECUTE
525/625
011 *
CHARACTER V-SIZE
BI
012
DROP FRAME MODE (WITH
525 OPERATION ONLY)
Basic menu items
Settings
This item sets the pre-roll time when performing editing from the BKMA-505.
0 ..
5
.. 15 seconds
Set the horizontal position of timecode and other superimposed text information output
from the MONITOR OUT terminals of the SDI (SUPER) and ANALOG COMPOSITE
(SUPER) terminals. The value 00 ..
edge of the screen: incrementing the value by one moves the displayed text one character
position to the right.
Set the vertical position of timecode and other superimposed text information output
from the MONITOR OUT terminals of the SDI (SUPER) and ANALOG COMPOSITE
(SUPER) terminals. The value 00 ..
edge of the screen: incrementing the value by one moves the displayed text down one
line.
Select the information superimposed on the output from the SDI (SUPER) and
ANALOG COMPOSITE (SUPER) connectors when the CHARACTER switch on the
system setup panel is set to ON.
time & stat
: Time data information and operating status
time & UB : Time data information and user bits
time only
: Time data only
time & TM1: Time data information and TM1
time & TM2: Time data information and TM2
Select which buttons on the control panel of this unit can be operated when being
remotely controlled by another device.
all disable
: All buttons and switches are disabled.
stop
: Only the STOP button operates.
all enable
: All controls operate.
This item sets the post-roll time when performing editing from the BKMA-505.
0 ..
5
.. 15 seconds
Sets the control method for superimpose data output for MONITOR OUT of ANALOG
COMPOSITE.
switch
: Switches the CHARACTER SW on/off.
inhibit
: Normally not output.
Select the character style of the information superimposed on the output from the SDI
(SUPER) and ANALOG COMPOSITE (SUPER) connectors.
white
: White characters on black background
black
: Black characters on white background
W/out
: White characters with black outline
B/out
: Black characters with white outline
Select the NTSC or PAL standard.
525/60
: NTSC
625/50
: PAL
Note:
After changing the settings for this item, all material must be erased using -
ALL ERASE (menu 099).
Set the height of timecode and other information superimposed on the output from the
SDI (SUPER) and ANALOG COMPOSITE (SUPER) connectors.
X1
: Normal
X2
: Double height
Select the timecode generator operating mode.
DF
: Drop-frame mode
NDF
: Non-drop-frame mode
Note:
After changing the settings for this item, all material must be erased using -
ALL ERASE (menu 099).
* When setting items 002, 003, 009 and 011, watch the monitor to obtain the desired
condition. (However, if the setting differs from the currently running SETUP BANK,
the location of the character data on the monitor will not change.
16
.. 31:00 corresponds to the distance from the left
10
.. 12:00 corresponds to the distance from the top
3-4 Setup
3-19 (E)
Advertisement
Table of Contents
