Sony MAV-555SS Operation Manual page 35

• Specify the following as the editor VTR constants:
NTSC BLOCK-1
A0 70 00 3C 05 05 00 80
BLOCK-2
0C 04 FE 00 80 3C FF
PAL BLOCK-1
A1 70 00 3C 05 05 00 80
BLOCK-2
0C 04 FE 00 80 3C FF
Please refer to Section 3-4, "Setup" (page 3-18) for details about setup contents and basic
menu operations.
Notes
• Apply the same reference video signal to the VTR, editor, and the MAV unit,
set MAV-555SS expansion menu OUTPUT REF LOCK (menu 120) to REF
and REFERENCE SELECT (menus 349, 350, 351) to output ref.
Please refer to Section 3-3, "External Synchronization of Output Video Signals" (page 3-17)
and Section 3-4, "Setup" (page 3-18).
• Collection is performed from the controller connected to the R2 port, the
optional control panel (BKMA-505), the editing panel (MAVE-F555), etc.
• File assignments made to the RP port or the P2/P3 port are made from the
optional control panel (BKMA-505), the editing panel (MAVE-F555), etc.
• When configured with an editor that uses analog composite signals, the
optional BKMA-513 AD/DA Converter Board is necessary. When configured
with an analog audio mixer (such as MXP-29), the optional BKMA-570
Analog Audio Expansion Unit is also required.
• In BVE mode, the maximum variable mode playback speed is ±1× normal
speed; you cannot playback at double speed.
3-9 (E)
3-1 MAV-555SS Modes