Honda GP160H Manual page 69

dummyhead dummyhead
IGNITION SYSTEM
COOLING FAN/FLYWHEEL
REMOVAL/INSTALLATION
REMOVAL
Remove the ignition coil (page 8-3).
FLYWHEEL
REMOVAL:
Use the commercially available tool [1] to remove the flywheel.
8-4
WOODRUFF KEY
MAGNET PART
COOLING FAN
[1]
SIDE PLATE
BOLT (6 x 22 mm)
STARTER PULLEY
NUT (14 mm)
(Threads and seating surface)
75 N·m (7.5 kgf·m, 55 lbf·ft)
REMOVAL:
Hold the flywheel [1] with a commercially
available strap wrench [2], being careful not
to damage the magnet part.
Remove the flywheel nut (14 mm) [3].
[2]
[3]
[1]