Honda GP160H Manual page 10

dummyhead dummyhead
GP200H
Model
Description code
Type
Displacement
Bore x stroke
Net power (SAE J1349) *1
Continuous rated power
Maximum net torque (SAE J1349) *1
Compression ratio
Fuel consumption (at continuous rated power) *1
Ignition system
Ignition timing
Recommended spark plug
Lubrication system
Oil capacity
Recommended oil
Cooling system
Starting system
Stopping system
Carburetor
Air cleaner
Governor
Breather system
Fuel used
Fuel tank capacity
*1: The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600 min
Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary
depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance,
and other variables.
GP200H
GCATH
4 stroke, overhead valve, single cylinder, inclined by 25°
196 cm 3 (12.0 cu-in)
68.0 x 54.0 mm (2.68 x 2.13 in)
4.1 kW (5.5 HP)/3,600 min
3.7 kW (5.0 HP)/3,600 min
12.4 N·m (1.26 kgf·m, 9.1 lbf·ft)/2,500 min
8.5 : 1
1.7 Liters (0.45 US gal, 0.37 Imp gal)/h
Transistorized magneto
B.T.D.C. 20° /1,400 min
BPR6ES (NGK)/W20EPR-U (DENSO)
Forced splash
0.60 Liter (0.63 US qt, 0.53 Imp qt)
SAE 10W-30 API service classification SE or higher
Forced air
Recoil starter
Ignition primary circuit ground
Horizontal type, butterfly valve
Dual type
Centrifugal weight system
Flat valve type
Unleaded gasoline with a pump octane rating 86 or higher
3.1 Liters (0.82 US gal, 0.68 Imp gal)
-1 (rpm) (net power) and at 2,500 min
SPECIFICATIONS
-1
(rpm)
-1 (rpm)
-1
(rpm)
-1 (rpm)
-1 (rpm) (max net torque).
1-5