Honda GP160H Manual page 47

dummyhead dummyhead
FAN COVER
FAN COVER REMOVAL/INSTALLATION
FAN COVER
When disassembling the fan cover, remove the
following:
– Recoil starter (page 9-2)
– Engine stop switch (page 10-2)
• Route the tube and wires properly (page 2-8).
ENGINE WIRE HARNESS CONNECTOR
(With oil level switch and oil alert unit)
BOLT (6 x 12 mm) (4)
FAN COVER
INSTALLATION:
Be careful not to clip the fuel tube.
5-2
ENGINE STOP SWITCH CONNECTOR
(With oil level switch and oil alert unit)
ENGINE STOP SWITCH ONLY:
ENGINE WIRE HARNESS CONNECTOR