dummyhead
dummyhead
FUEL SYSTEM
AIR CLEANER
REMOVAL/INSTALLATION
• Route the breather tube properly (page 2-8).
CARBURETOR SPACER
INSTALLATION:
Before installing, check for damage.
Note the installation direction.
Viewed from air cleaner side
6-4
AIR CLEANER COVER
GROMMET
INNER FILTER (PAPER)
BOLT (6 x 20 mm)
COLLAR
BREATHER TUBE
AIR CLEANER COLLAR (2)
WING NUT
WING NUT
OUTER FILTER (FOAM)
AIR CLEANER
ELBOW SEAL
AIR CLEANER ELBOW
REMOVAL/INSTALLATION:
Remove and install the air
cleaner elbow with the fuel
valve lever in the OFF
position and the choke lever
in the CLOSE position.
Before installation, clean the
inside of the air cleaner
elbow.
AIR CLEANER ELBOW NUT (6 mm) (2)
9 N·m (0.9 kgf·m, 6.6 lbf·ft)