Honda GP160H Manual page 50

dummyhead dummyhead
FUEL TANK REMOVAL/INSTALLATION
Gasoline is highly flammable and explosive. You
can be burned or seriously injured when handling
fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Remove the fan cover (page 5-2).
Place a suitable container under the carburetor.
Turn the fuel valve lever [1] to the ON position.
Loosen the drain screw [2] and drain the fuel.
• Route the fuel tube properly (page 2-8).
FUEL FILLER CAP PACKING
CHECK:
Check for deterioration or cracks.
FUEL TANK JOINT
2 N·m (0.2 kgf·m, 1.5 lbf·ft)
CHECK:
Check the screen of the fuel tank
joint for clogs or damage.
FUEL TUBE
CHECK:
Check for deterioration, cracks or clogs.
GP160H: BOLT (6 x 29 mm)
GP200H: BOLT (6 x 34 mm)
10 N·m (1.0 kgf·m, 7 lbf·ft)
O-RING
FUEL SYSTEM
FUEL FILLER CAP
FUEL TANK
NUT (6 mm) (2)
10 N·m (1.0 kgf·m, 7 lbf·ft)
[1]
[2]
6-3