Table of Contents
Advertisement
Image Settings – RGBHV inputs only. Provides configuration for the analog inputs to
•
optimize them for scaling (see
Audio Config – Select the mode of operation for the audio inputs (see
•
Page
•
General Settings – Selects the priority of auto input switching and sets the tally out
LED indicator (see
In addition, unless it has been hidden, the AV Controls panel is always present.
Input/Output Configuration
Click the Input/Output Config tab (see figure 34,
Configuration page.
2
2
Figure 34.
Input Configuration panel (
The Input/Output Configuration page shows the current status of all inputs and the
output. In the AV Controls panel (
NOTE: The signal indicator in the AV Controls panel lights green when a signal is
present on the corresponding input and orange when there is no signal present.
Input – This number corresponds to the input number on the rear panel.
•
•
Signal Type – Indicates the source signal type.
RGBHV – The input is an analog signal.
•
Digital Video – The input is an HDMI or DVI signal.
•
•
HDCP Status – This column indicates the HDCP signal status for the digital inputs only.
HDCP Authorized (inputs 3 through 6 only) – Select the HDCP Authorized
•
checkbox to have the input report as an HDCP authorized device. If the box is not
checked, the source is blocked from encrypting its output. This may result in content
not passed to the output.
NOTE: This option is not available for analog inputs 1 and 2.
This feature allows a digital input report as an HDCP authorized sink to a source.
Some sources encrypt their output even if the source material does not require HDCP
encryption, preventing content from being displayed on a non-HDCP compliant display.
If that happens, the display mutes the video output to black or displays a warning
message.
Image Settings Page
on page 34).
General Settings Page
1
1
3
3
Input/Output Configuration Page
)
3
2
MPS 601 • Software Configuration and Control
on page 33).
on page 35).
) to open the Input/Output
1
4
4
), click an input to select it for configuration.
Audio Config
29
Advertisement
Table of Contents
