Table of Contents
Advertisement
HDCP
The HDMI group is HDCP compliant. When EDID Minder is enabled (default), HDCP is not
supported if adapters are used to provide DVI inputs.
HDCP communication occurs between the selected input source and the output device
directly (pass-though).
Audio Modes
There are three audio modes to customize switching the digital and analog audio inputs
to the output. They are selectable using SIS commands (see
page 42) or the PCS software (see
NOTES:
Mode 1 (Default)
When each RGBHV input has an associated audio input, the associated audio input follows
the selected input.
•
•
•
Laptop with
HDMI Output
HDMI
Laptop with VGA Output
Audio
RGBHV
PC with VGA Output
RGBHV
Audio
Blu-ray Player
STANDBY/ON
PQLS
Figure 11.
•
For a 4K source connected to inputs 3 through 6, analog audio can not be
substituted for embedded audio.
•
When embedded audio for a 4K source is muted via PCS or SIS command, the
corresponding 4K video is also muted.
•
When video for a 4K source is muted via PCS or SIS command, the corresponding
embedded audio is also muted.
Audio input A follows input 1 (yellow box in figure 11).
Input 1 selected: RGBHV 1 video and audio input A switch to the HDMI output.
Audio input B follows input 2 (green box in figure 11).
Input 2 selected: RGBHV 2 video and audio input B switch to the HDMI output.
Inputs 3 through 6 selected: the associated embedded audio switches to the output.
MPS 601
1
A
POWER
12V
RGBHV
0.5A MAX
2
B
HDMI
HDMI
OPEN/CLOSE
FL OFF
USB
Audio Mode 1 Switching (Default)
Audio Config Page
on page 34).
Laptop with
HDMI Output
HDMI
HDMI
Flat Panel Display with Speakers
INPUTS
OUTPUT
3
5
HDMI
C
CONTACT IN / TALLY OUT
4
HDMI
6
HDMI
C
HDMI
Laptop with
HDMI Output
Audio input mode
on
G
T
C G
T
C G
T
+V
1
3
5
REMOTE
RS-232
2
4
6
G
T
C G
T
C G
T
Tx Rx G
Extron
MPS 601
Media Presentation
Switcher
MPS 601 • Operation
12
Advertisement
Table of Contents
