Recording And Parental Control Settings (Features) - Sony RDR-HX510 Operating Instructions Manual

• DTS (DVD VIDEO only)
Selects whether or not to output DTS signals.
On
Select this when the recorder is
connected to an audio component
with a built-in DTS decoder.
Off Select this when the recorder is
connected to an audio component
without a built-in DTS decoder.
• MPEG (DVD VIDEO only)
Selects the type of MPEG audio signal.
PCM Select this when the recorder is
connected to an audio component
without a built-in MPEG decoder.
If you play MPEG audio sound
tracks, the recorder outputs stereo
signals via the DIGITAL OUT
(COAXIAL) jack.
MPEG Select this when the recorder is
connected to an audio component
with a built-in MPEG decoder.
• 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/
The DVD video audio signal is
16bit converted to 48kHz/16bit and
output.
96kHz/ All signals containing 96kHz/
24bit
24bit are output without
conversion. However, the signals
are output at 48kHz/16bit if
copyright-protected signals are
contained.
b
Notes
• "48kHz/96kHz PCM" setting has no effect when audio
signals are output from the LINE 2 OUT (R-AUDIO-
L) jacks. If the sampling frequency is 96kHz, signals
are simply converted to 96kHz analog signals and
output.
• When you use the DIGITAL OUT (COAXIAL) jack to
listen to MPEG audio signals and set "MPEG" to
"MPEG" in "Audio" setup, no sound will come from
your speakers if you select one of the TVS modes.
Recording and Parental
Control Settings (Features)
The "Features" setup allows you to adjust
recording and parental control settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Features," and press ENTER.
The "Features" setup appears with the
following options. The default settings are
underlined.
SETUP
TV Direct Rec :
Settings
Auto Chapter :
Video
Parental Control
Audio
One Touch Dubbing
Features
Options Synchro Rec
HQ Setting
Easy Setup Colour System
Screen Saver
TV Direct Rec (HDD/DVD+RW/DVD-RW/
DVD+R/DVD-R only)
On
Allows you to easily record what
you are watching on the TV using
SMARTLINK.
Off Turns off the TV Direct Rec
function.
Auto Chapter
Selects whether to automatically divide a
recording (a title) into chapters during recording
or dubbing.
On For the HDD or a DVD-RW (VR
mode), the recorder detects
changes in the picture and sound
and automatically inserts chapter
marks.
For other recordable discs, the
recorder inserts chapter marks at
approximately 6-minute intervals.
Off
No chapter mark is inserted.
On
On
Record to HDD
HQ
PAL
On
,continued 91