Connecting to the LINE 2 IN or LINE 4 IN jacks
Connect a VCR or similar recording device to the LINE 2 IN or LINE 4 IN jacks of this recorder. If the
equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.
S-video cord
(not supplied)
z Hint
When the connected equipment outputs only monaural sound, use audio cables that distribute monaural sounds to left/
right channels (not supplied).
b
Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment's input jack with the other equipment's output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
24
VCR, etc.
OUTPUT
S VIDEO
VIDEO
to LINE 2 IN
LINE 1 - TV
COAXIAL
IN
OUT
R-AUDIO-L
DIGITAL OUT
PCM/DTS/MPEG/
AERIAL
DOLBY DIGITAL
OPTICAL
LINE 4 IN
: Signal flow
AUDIO
L
R
Audio/video cord
(not supplied)
LINE 3
/DECODER
VIDEO
S VIDEO
R-AUDIO-L
VIDEO
S VIDEO
LINE 2 OUT
to LINE 4 IN
VCR, etc.
DVD recorder (front)
(rear)
Y
P
/ C
B
B
P
R
/ C
R
~
AC IN
COMPONENT
VIDEO OUT