Step 5: Connecting The Mains Lead - Sony RDR-HX510 Operating Instructions Manual

Sony dvd recorder operating instructions rdr-hx510, rdr-hx710/hx910
Hide thumbs Also See for RDR-HX510:
Table of Contents

Advertisement

z Hint
For correct speaker location, see the operating
instructions supplied with the connected components.
b
Notes
• Do not connect your TV's audio output jacks to the
LINE IN (R-AUDIO-L) jacks at the same time. This
will cause unwanted noise to come from your TV's
speakers.
• In the connection A, do not connect the LINE IN (R-
AUDIO-L) and LINE 2 OUT (R-AUDIO-L) jacks to
your TV's audio output jacks at the same time. This
will cause unwanted noise to come from your TV's
speakers.
• In the connection B, after you have completed the
connection, make the appropriate settings under
"Audio Connection" in "Easy Setup" (page 22).
Otherwise, no sound or a loud noise will come from
your speakers.
• With the connection B, the surround sound effects of
this recorder cannot be used.
*1
Manufactured under license from Dolby Laboratories.
"Dolby," and the double-D symbol are trademarks of
Dolby Laboratories.
*2
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
18
Step 5: Connecting the
Mains Lead
Connect the supplied mains lead to the AC IN
terminal of the recorder. Then plug the recorder
and TV mains leads (power cords) into the mains.
After you connect the mains lead, you must wait
for a short while before operating the
recorder. You can operate the recorder once the
front panel display lights up and the recorder
enters standby mode.
If you connect additional equipment to this
recorder (page 23), be sure to connect the mains
lead after all connections are complete.
~
AC IN
1
to AC IN
2
to mains

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdr-hx710/hx910Rdr-hx710Rdr-hx910

Table of Contents