Recording And Parental Control Settings (Features) - Sony RDR-HX900 Operating Instructions Manual

Dvd players & recorders: dvd recorder
Hide thumbs Also See for RDR-HX900:
Table of Contents

Advertisement

If you connect a component that does not accept
the selected audio signal, a loud noise (or no
sound) will come out from the speakers, and may
affect your ears or cause speaker damage.
• Dolby Digital (HDD/DVDs only)
Selects the type of Dolby Digital signal.
D-PCM
Select this when the recorder
is connected to an audio
component lacking a built-in
Dolby Digital decoder. You
can select whether the
signals conform to Dolby
Surround (Pro Logic) or not
by making adjustments to
the "Downmix" item in
Audio Setup (page 90).
Dolby
Select this when the recorder
Digital
is connected to an audio
component with a built-in
Dolby Digital decoder.
• DTS (DVD VIDEO only)
Selects whether or not to output DTS signals.
On
Select this when the recorder
is connected to an audio
component with a built-in
DTS decoder.
Off
Select this when the recorder
is connected to an audio
component without a built-in
DTS decoder.
Recording and Parental
Control Settings (Features)
The Features Setup allows you to adjust recording
and parental control settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Features," and press ENTER.
The Features Setup appears with the
following options. The default settings are
underlined.
SETUP
Settings
Auto Chapter :
Video
Parental Control
Audio
One Touch Dubbing
Features
HQ Setting :
Options
Auto Title Erase :
Rec Mode Adjust :
Easy Setup
Auto Chapter
Automatically divides a recording (a title) into
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
Off
No chapter mark is inserted.
6Min
Inserts chapter marks at
approximately 6-minute
intervals.
15Min
Inserts chapter marks at
approximately 15-minute
intervals.
Notes
• Depending upon the size of the recording being made,
the actual interval may vary from the interval selected
in "Auto Chapter." The selected interval should only be
used as an approximation to create chapters.
• This function is not available when dubbing DV/
Digital8 format tapes to HDD and DVD-RWs (VR
mode). Chapter marks are automatically entered where
the recordings start on the tape (pages 79, 80).
6 Min
HQ
Off
Off
,continued
91

Advertisement

Table of Contents
loading

Table of Contents