Audio Settings (Audio) - Sony RDR-HX510 Operating Instructions Manual

Line3 Input
Selects a method of inputting video signals for the
LINE 3/DECODER jack. The picture will not be
clear if this setting does not match the type of
video input signal.
Video/
Inputs video signals or RGB
RGB signals.
Decoder
Select this when connecting to a
PAY-TV/Canal Plus decoder.
S Video
Inputs S-video signals.
Line3 Output
Selects a method of outputting video signals for
the LINE 3/DECODER jack.
Video
Outputs video signals.
S Video Outputs S-video signals.
Line4 Input
Selects a method of inputting video signals for the
LINE 4 IN jack on the rear panel of the recorder.
Video
Inputs video signals.
S Video Inputs S-video signals.

Audio Settings (Audio)

The "Audio" setup allows you to adjust the sound
according to the playback and connection
conditions.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Audio," and press ENTER.
The "Audio" setup appears with the following
options. The default settings are underlined.
SETUP
Settings Audio ATT :
Audio DRC :
Video
Audio Downmix :
Audio Connection
Features
Options
Easy Setup
Audio ATT (attenuation)
If the playback sound is distorted, set this item to
"On." The recorder reduces the audio output level.
This function affects the output of the following
jacks:
– LINE 2 OUT R-AUDIO-L jacks
– LINE 1 – TV jack
– LINE 3/DECODER jack
On Select this when the playback
sound from the speakers is
distorted.
Off
Normally select this position.
Off
Standard
Dolby Surround
,continued 89