Setting The Sewing Feet; Setting The Sewing Foot Feed; Setting The Zero Stroke Of The Sewing Feet And The Tension Force Of The Torsion Spring - DURKOPP ADLER 969 Service Instructions Manual

Setting the sewing feet

11 Setting the sewing feet

11.1 Setting the sewing foot feed

11.1.1 Setting the zero stroke of the sewing feet and the tension force
Proper setting
The connecting rods are in a line.
 The ball pin is touching the stop screw.
Cover
• left and right arm cover ( p. 15)
Service Instructions 969 - 06.0 - 03/2019
CAUTION
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch off the machine before you set the sewing
feet.
of the torsion spring
The torsion spring is twisted 15° - 20°.
61