Img (Select Boot Image); Ipg (Gateway Ip Address) - Comtech EF Data MN/LBC4000.IOM Installation And Operation Manual

LBC-4000 L-Band Up/Down Converter System
Serial Interface Operation

8.3.16 IMG (Select Boot Image)

Command or Query. Set or return the firmware image to boot from at startup.
Controller-to-Target Arguments for
Instruction Code and Qualifier Command or
Response to
Command Query
IMG_ IMG_ 1 byte, numeric,
1 or 2
8.3.17 IPA (Management IP Address)
Command or Query. Set or return the Management IP Address for the '10/100
ETHERNET' port.
Controller-to-Target Arguments for
Instruction Code and Qualifier Command or
Response to
Command Query
IPA_ IPA_ 18 bytes,
numeric

8.3.18 IPG (Gateway IP Address)

Command or Query. Set or return the Gateway IP Address for the '10/100
ETHERNET' port.
Controller-to-Target Arguments for
Instruction Code and Qualifier Command or
Response to
Command Query
IPG_ IPG_ 15 bytes,
numeric
Description of Arguments
Query
Set or return in the form IMG_x where:
x=1 (Bulk Image 1) or 2 (Bulk Image 2)
Description of Arguments
Query
Set or return in the form IPA_aaa.bbb.ccc.ddd.yy
where:
aaa.bbb.ccc.ddd=IP Address where:
aaa=0-223
bbb=0-255
ccc=0-255
ddd=0-255
yy=network prefix (08-30)
Description of Arguments
Query
Set or return in the form IPG_aaa.bbb.ccc.ddd where:
aaa.bbb.ccc.ddd=IP Address where:
aaa=0-223
bbb=0-255
ccc=0-255
ddd=0-255
8–15
MN/LBC4000.IOM
Revision 5
Target-to-Controller
Response
Command Query
IMG_ IMG_x
Target-to-Controller
Response
Command Query
IPA_ IPA_aaa.bbb.
ccc.ddd.yy
Target-to-Controller
Response
Command Query
IPG_ IPG_aaa.bbb.
ccc.ddd