Insertion Of The Password; Description; Components Of The Page - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

7 - Insertion of the password

Description The page for the insertion of the password is open if a parameter to be set is selected, or the
Components of the page The page appears as follows:
78 | © 2013 ABB | 1SDH001000R0002 - L7804
menu Test, or if you want to change the password.
NOTE: insertion of the password is requested, if:
• The password has never been inserted.
• After programming has been cancelled.
• After a few minutes of inactivity have passed.
The password is composed of five digits, each of which can have a value from 0 to 9.
The default value is "00001", and it must be modified after the first switch-on in order to
prevent access to parameters and tests by unauthorized personnel.
In order to modify the password, from the menu Settings, you need to select System, New
Password.
A
Figure 78
The following table provides a description of the various areas of the page:
Pos. Function
A Cancels the operation, and opens the start menu.
B Shows the name of the page.
C Keys to increment and decrement the corresponding digit.
D It displays the digits of the password.
Confirm key:
• Confirmation after inserting a digit in a position from 1 to 4 will automatically
bring you to the next digit.
• When the fifth digit is confirmed, the entire password is confirmed and the
E
selected page is opened.
NOTE:
The Confirm key must be pressed every time you want to confirm a digit.
B
Password
0 * * *
Confirm
E
Ekip Touch protection release | 7 - Insertion of the password
ABB | SACE Emax 2
C
*
D
Continued on the next page