Identification Of Packaging; Packaging Checks; Damage And Discrepancy Report - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Identification of packaging Examine the state of the packaging and check that:
Packaging checks Examine the state of the material received and verify that:
Damage and Discrepancy
8 | © 2013 ABB | 1SDH001000R0002 - L7804
• The data on the packaging plate match the data of the order.
• The box is intact and perfectly closed.
Figure 3
Pos. Description
1 Short description of the circuit-breaker
2 Description of accessories
3 Commercial code
4 Confirmation number and location
5 Circuit-breaker serial number
6 Features of the circuit-breaker
• The circuit-breaker or the fixed part are consistent with the order.
• The circuit-breaker or the fixed part are completely intact.
IMPORTANT:
• If the material is to be stored, check it beforehand. For opening the
packaging, follow the procedures outlined in the section "Unpacking and
handling - opening the packages" on page 10
• In the case of any inconsistencies, report them within five days of reception.
See the paragraph "Damage and Discrepancy Report" in this chapter.
If there is any damage to the packaging upon receipt and / or inconsistencies between order
Report
and product identification label or product please contact ABB. Damage to the packaging
must be reported no later than seven days from receipt of the material.
NOTE: The notification must indicate the Packing List number.
1
SACE EMAX E2.2 N 1600
VERSION
FIXED
6
POL 4
TERMINALS
REAR HORIZONTAL TERMINALS
8 0 1 5 6 4 4 6 4 0 1 1 8 3
8 0 3 1 0 0 4 0 3 5
Designed by ABB SACE Division
Emax E2.2-E4.2-E6.2 circuit-breakers | 2 - Transport and checking on receipt
ABB | SACE Emax 2
WITH ASSEMBLED ACCESSORIES
2
YO 24V AC-DC
3
1SDA055987R1
CODE
4
A.B. 1130055880 004100
5
BB44005099
FB.NR.