Measurements Menu - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Measurements Menu This menu allows you to:
72 | © 2013 ABB | 1SDH001000R0002 - L7804
• Open lists of recorded events.
• Display measurements in graphical or numerical form.
• Reset measurements.
The following table illustrates the submenus and the parameters associated to the menu
Measurements up to Level 3 (if present), and the Ekip Touch releases where they can be
found. The options corresponding to parameters and commands are underlined, to distinguish
from those corresponding to submenus.
Options
Measurements
• Openings: opens a list of the openings performed.
• Events: opens a list of the recorded events.
History Data
• Measurements: opens a list of the dimensions with
which the history can be displayed.
It opens the Edit Parameters page, to set the standby
Measurement
time between successive recordings of measurements in
interval
the history.
Power factor It displays the power factor measured.
Frequency Shows the frequency measured for the voltages.
• Energy meters: it displays the active, reactive and
apparent energies measured.
• Reset Meters: resets the energy meters.
Energy • Energy RESET: it opens a list of the parameters for
programming resetting of the energy counters (see the
chapter "19 - Operating features", and the paragraph "
Functional specifications", on page 148).
It shows the peak factors measured for the phase
Peak factor
currents and of the neutral.
Harmonic Opens the Edit Parameters page, to enable/disable the
distortion alarm with a peak factor greater than 2.1.
Ekip
Opens a list of the measurements related to the
Synchrocheck
synchronism function.
(2)
ABB | SACE Emax 2
Release
Touch
G-Touch
Hi-Touch
G Hi-Touch
Touch
(1)
G-Touch
Hi-Touch
G Hi-Touch
Touch
G-Touch
Hi-Touch
G Hi-Touch
Touch
(1)
G-Touch
Hi-Touch
G Hi-Touch
Continued on the next page
Ekip Touch protection release | 6 - Menu