FM Mode Operation
Repeater Operation
The FTDX101D may be utilized on 29 MHz and
50 MHz repeaters.
1. Press and hold the [MODE] key, and then
touch [FM].
2. Set the FTDX101D to the desired repeater's
output frequency (downlink from the repeat-
3. Press the [FUNC] key.
4. Touch [RPT] .
5. Rotate the [MULTI] knob to select the desired
repeater shift direction.
The selections are:
where "SIMP" represents "Simplex" operation
6. Press the [FUNC] key.
7. Touch [ENC/DEC] .
8. Rotate the [MULTI] knob to select "ENC".
9. Press the [FUNC] key.
10. Touch [TONE FREQ] .
11. Rotate the [MULTI] knob to select the desired
CTCSS Tone to be used. A total of 50 stan-
dard CTCSS tones are provided (see the
12. Press and hold the microphone PTT switch to
begin transmission.
34
CTCSS Tone Frequency (Hz)
67.0
69.3
71.9
82.5
85.4
88.5
100.0
103.5
107.2
123.0
127.3
131.8
151.4
156.7
159.8
171.3
173.8
177.3
189.9
192.8
196.6
210.7
218.1
225.7
250.3
254.1
-
Tone Squelch Operation
The "Tone Squelch" may be activated to keep the
receiver silent until an incoming signal modulated
with a matching CTCSS tone is received. The
receiver squelch will then open in response to the
reception of the required tone.
1. Press and hold the [MODE] key, and then
touch [FM].
2. Set the transceiver to the desired frequency.
3. Press the [FUNC] key.
4. Touch [ENC/DEC] .
5. Rotate the [MULTI] knob select to "TSQ".
6. Press the [FUNC] key.
7. Touch [TONE FREQ] .
8. Rotate the [MULTI] knob to select the de-
sired CTCSS Tone to be used. A total of 50
standard CTCSS tones are provided (see the
74.4
77.0
79.7
91.5
94.8
97.4
110.9
114.8
118.8
136.5
141.3
146.2
162.2
165.5
167.9
179.9
183.5
186.2
199.5
203.5
206.5
229.1
233.6
241.8
-
-
-