Operating Band Selection; Operating Mode Select - Yaesu FTDX101D Operation Manual

Operating Band Selection

Press the BAND key corresponding to the Ama-
teur band on which you wish to begin operation.
The Indicator of the MAIN band lights "White",
and the SUB band lights "Blue".
During transmit the indicator will light in "Red" to
designate which band is transmitting.
Mark the operation band
Press and hold the desired band key, the orange
Band Indicator will light.
Press and hold the key again to turn the Indicator
OFF.
Lights in orange
The Band Indicator may be used to designate
a connected antenna, a DXpedition, or con-
test operation band. Use it instead of memo.
More than one band may be marked at the
same time.

Operating Mode Select

Press and hold the [MODE] key, then touch the
desired operating mode.
Pressing the [SSB] / [CW] key repeatedly will tog-
gle to the alternate mode.
In the LSB or USB modes, pressing the [SSB]
key toggles between "LSB" and "USB" mode.
In the CW-L or CW-U modes, pressing the [CW]
key toggles between "CW-L" and "CW-U" mode.
[SSB] key
[CW] key
19