Cw Mode Operation; Setup For Straight Key Operation - Yaesu FTDX101D Operation Manual

CW Mode Operation

The powerful CW operating capabilities of the FTDX101D permit operation using an electronic keyer pad-
dle, a "straight key", or a computer-based keying device.

Setup for Straight Key Operation

1.
2. Press the [CW] key to engage CW operation.
3. Rotate the Main Tuning Dial knob to select
the desired operating frequency.
4. Press the [BK-IN] key.
5. Press the [MONI] key.
The LED inside the [MONI] key glows orange; and the
CW monitor is activated.
6. Operation using your CW key may now pro-
ceed.
RX system for CW is configured for "Semibreak-in"
operation.
32
CW Delay Time Setting
hang time of the transmitter, after you have fin-
ished sending, may be adjusted to a comfortable
value consistent with your sending speed.
1. Press the [FUNC] key.
2.
BK-IN DELAY] .
3. Start sending and rotate the [MULTI] knob to
adjust the hang time, as you prefer for com-
fortable operation.
4. Press the [FUNC] key to save the new set-
ting and exit the Setting Menu.
5. Press the [FUNC] key exit to normal opera-
tion.