Fm Mode Operation; Repeater Operation; Tone Squelch Operation - Yaesu FTDX101MP Operation Manual

Repeater Operation

The FTDX101 may be operated on 29 MHz and
50 MHz repeaters.
1. Press and hold the [MODE] key, and then
touch [FM].
2. Set to the desired repeater's output frequency
(downlink from the repeater).
3. Press the [FUNC] key.
4. Touch [RPT] .
5. Rotate the [MULTI] knob to select the desired
repeater shift direction. The selections are:
"SIMP" → "+" → "–" → "SIMP"
● To program the proper repeater shift, use
Menu items "RPT SHIFT(28MHz)" (page
88) and "RPT SHIFT(50MHz)" (page
88), as appropriate.
6. Press the [FUNC] key.
7. Touch [ENC/DEC] .
8. Rotate the [MULTI] knob to select "ENC".
9. Press the [FUNC] key.
10. Touch [TONE FREQ] .
11. Rotate the [MULTI] knob to select the de-
sired CTCSS Tone to be used. A total of 50
standard CTCSS tones are provided (see the
CTCSS Tone Chart).
Press and hold the microphone PTT switch to be-
gin transmission.
67.0 69.3 71.9
100.0 103.5 107.2
151.4 156.7 159.8
189.9 192.8 196.6
250.3 254.1 -

FM Mode Operation

CTCSS Tone Frequency (Hz)
74.4 77.0 79.7
110.9 114.8 118.8
162.2 165.5 167.9
199.5 203.5 206.5
- - -

Tone Squelch Operation

The "Tone Squelch" may be activated to keep the
receiver silent until an incoming signal modulated
with a matching CTCSS tone is received. The
receiver squelch will then open in response to re-
ception of the required tone.
1. Press and hold the [MODE] key, and then
touch [FM].
2. Set the transceiver to the desired frequency.
3. Press the [FUNC] key.
4. Touch [ENC/DEC] .
5. Rotate the [MULTI] knob to select "TSQ".
6. Press the [FUNC] key.
7. Touch [TONE FREQ] .
8. Rotate the [MULTI] knob to select the de-
sired CTCSS Tone to be used. A total of 50
standard CTCSS tones are provided (see the
CTCSS Tone Chart).
82.5 85.4 88.5
123.0 127.3 131.8
171.3 173.8 177.3
210.7 218.1 225.7
- - -
91.5 94.8 97.4
136.5 141.3 146.2
179.9 183.5 186.2
229.1 233.6 241.8
- - -
65