Setting The Operating Frequency - Yaesu FTDX101D Operation Manual

Setting the Operating
Frequency
Setting Frequency with the MAIN Dial
Rotate the MAIN dial knob to tune within the
band, and begin normal operation.
selection.
Tuning of 1 MHz or 1 kHz
1. Touch the "MHz" or "kHz" area of the frequen-
cy display.
2. Rotate the MAIN dial knob.
3. Touch "MHz" or "kHz" area of the frequency
Touch screen tuning
When the Scope Screen is touched, the frequen-
cy will be changed corresponding to the place on
the display that is touched.
Tuning of 1 Hz (FINE TUNING)
In the SSB, CW, RTTY, DATA-L or DATA-U mode,
the frequency can be adjusted with 1 Hz steps.
steps.
1. Press the [FINE TUNING] key.
2. Rotate the MAIN dial knob.
20
-
MAIN Dial
Keyboard Frequency Entry
1. Touch the "Hz" area of the frequency display.
2. Enter the frequency using the numeric keys.
Clear all entered numbers.
will be canceled.
3.
Setting with the [MULTI] knob
The [MULTI] knob may be set to adjust in preset
steps.
1. Press the [FUNC] k e y .
2. Touch [CH DIAL] .
3. Rotate the [MULTI] knob.
selection.
Erases the rightmost digit.
The Entered frequency is
confirmed.
The display returns to the
previous screen when this
symbol is touched.