Memory Operation
Memory Storage
1. In the VFO mode, select the frequency, mode,
and status, the values you want to have
stored.
2. Press and hold the [V M] k e y .
3. Rotate the [MULTI] knob to select the memo-
ry channel that you wish to store the data on.
4. Press the [V M] key to store the frequen-
cy and other data into the selected memory
channel.
5.
ation is completed.
38
Memory Channel Recall
1. Press the [V/M] key.
2. Press the [FUNC] key.
3. Touch [MEM CH].
4. Rotate the [MULTI] knob to select the desired
memory channel.
5. To exit from memory mode and return to the
VFO mode, press the [V/M] key.
-
Memory Tune Operation
The frequency may be freely tuned off from any
memory channel in "Memory Tune" mode; this is
similar to VFO operation.
So long as you do not over-write the contents of
the current memory, Memory Tune operation will
not alter the contents of the memory channel.
Press the [V/M] key momentarily to return to the
originally memorized frequency of the current
memory channel.