Siemens SINAMICS S120 Function Manual page 62

Extended Setpoint Channel
Extended setpoint channel
S Control signal STW1.6
S Control signal STW2.1
Parameterization with STARTER
The "ramp-function generator" parameter screen is selected via the following icon
in the toolbar of the STARTER commissioning tool:
Fig. 2-15
Parameter overview (see List Manual)
Adjustable parameters
S p1115
S p1120[D]
S p1121[D]
S p1122[C]
S p1130[D]
S p1131[D]
S p1134[D]
S p1135[D]
S p1136[D]
S p1137[D]
S p1140[C]
S p1141[C]
S p1143[C]
S p1144[C]
S p1145[D]
Visualization parameters
S r1119
S r1150
2-62
Enable setpoint
Bypass ramp-function generator
STARTER icon for "ramp-function generator"
Ramp-function generator selection
Ramp-function generator ramp-up time
Ramp-function generator ramp-down time
BI: Bypass ramp-function generator
Ramp-function generator initial rounding-off time
Ramp-function generator final rounding-off time
Ramp-function generator rounding-off type
OFF3 ramp-down time
OFF3 initial rounding-off time
OFF3 final rounding-off time
BI: Enable the ramp-function generator
BI: Start ramp-function generator
BI: Ramp-function generator, accept setting value
CI: Ramp-function generator setting value
Ramp-function generator tracking
CO: Ramp-function generator setpoint at the input
CO: Ramp-function generator speed setpoint at the output
© Siemens AG, 2005. All rights reserved
SINAMICS S120 Function Manual, 06/05 Edition
J