Siemens SINAMICS S120 Function Manual page 132

Operating Modes
Vector control
Parameters for Vdc controller (see List Manual)
S p1240[0...n]
S r1242
S p1243[0...n]
S p1245[0...n]
S r1246
S p1247[0...n]
S p1250[0...n]
S p1251[0...n]
S p1252[0...n]
S p1254
S p1256[0...n]
S p1257[0...n]
S r1258
3-132
Vdc controller or Vdc monitoring configuration
Vdc_max controller switch-in level
Vdc_max controller dynamic factor (control)
Vdc_min controller switch-in level (kinetic buffering) (control)
Vdc_min controller switch-in level (kinetic buffering) (control)
Vdc_min controller dynamic factor (kinetic buffering) (control)
Vdc controller proportional gain (control)
Vdc controller integral-action time (control)
Vdc controller derivative-action time (control)
Vdc_max controller automatic detection ON level (control)
Vdc_min controller response (kinetic buffering) (control)
Vdc_min controller speed threshold (controller)
CO: Vdc controller output (control)
© Siemens AG, 2005. All rights reserved
SINAMICS S120 Function Manual, 06/05 Edition