JRC JMA-3300 Series Installation Manual page 42

Chapter 3 INSTALLATION OF THE DISPLAY UNIT
3.6 CONNECTING TO THE GPS COMPASS
Trun the connector plug until it is firmly fixed.
Using JRC's dedicated cable makes it possible to easily connect to JLR-10.
Using this cable also makes it possible to receive bearing signals from JLR-10 as well as
receive latitude and longitude information as NMEA data.
Connecting to JLR-20/30
Connect the CFQ-5469 connector to the "DATA IN/OUT1" connector of the rear of
JLR-20/30.
Connecting to JLR-20/30
Directly connect the GPS compass (JLR-20/30) HDG data connector to the connector for
which "HDG" is engraved at the rear of the display unit cabinet.
3-12
Connect the CFQ-6934
HDG data connector.