JRC JMA-3300 Series Installation Manual page 113

GPSSingle : Fix a position only with single GPS. Does not perform fixing with
SBAS :
Beacon
AUTO :
 Fix Mode Setting
Set the GPS fix mode.
1 Open GPS Setting
"Fix Mode" menu appears.
After setting, open "8. Send Data", and send the setting to the GPS receiver.
2D :
3D :
AUTO : 2D positioning and 3D positioning can automatically be selected with
 Elevate Mask Setting
Limits the satellite to be used with elevation angle.
1 Open GPS Setting
"Elevate Mask" menu appears.
Press the cursor key or turn the [MULTI] control to set the elevate mask.
The elevate mask can be set between 5 and 89°.
After setting, open "8. Send Data", and send the setting to the GPS receiver.
SBAS or beacon.
Fix a position with SBAS or single GPS. Does not perform fixing
with beacon.
: Fix a position with beacon or single GPS. Does not perform fixing
with SBAS.
The optimum setting is selected from single GPS, SBAS and
beacon.
- Fix Mode .
2D positioning can be done with height acquired.
3D positioning can be done with height acquired.
optimum.
- Elevate Mask .
Chapter 4 ADJUST MENU SETTINGS
4.9 GPS
4
4-47