JRC JMA-3300 Series Installation Manual page 139

 Scanner Running Time
Initializes the scanner operating time.
1 Open Scanner Time Clear
Yes :
No :
 Scanner Transmit Time
Initializes the scanner transmit time.
Initialize the transmit time as shown below when magnetron is replaced.
1 Open Scanner Time Clear
Yes :
No :
When "Yes" is selected, the transmit time stored in the scanner internal control
circuit is initialized to "0".
Chapter 4 ADJUST MENU SETTINGS
- Scanner Time Clear .
Clears the scanner operating time.
Does not clear.
- TX Time Clear .
Clears the scanner transmit time.
Does not clear.
4.11 MAINTENANCE
4-73
4