JRC JMA-3300 Series Installation Manual page 39

 Setting of JMA-3300
Basically, no setting is required.
No special setting is required for the use.
However, to change the setting for selecting or restricting the sentences to be received,
change the setting as described in 4.8 "Communication Port Setting".
Note:
 When replacing JRC's GPS receiver, initialize the GPS receiver.
For details of the initializing procedure, see "■ GPS Adjust" of section
"4.9.1 GPS SETTING".
 NMEA0183 standard input/output sentences
 Input sentences
$xxACK
$xxBWC
$xxCUR
$xxGGA
$xxGLL
$xxGNS
$xxMTW
$xxMWD
$xxMWV
$xxRMA
$xxRMB
$xxRMC
$xxROT
$xxRSA
$xxTHS
$xxVBW
$xxVDM
$xxVDO
$xxVTG
$xxZDA
Chapter 3 INSTALLATION OF THE DISPLAY UNIT
3.5 CONNECTING TO THE JRC'S GPS RECEIVER
Acknowledgement alarm
Bearing and Distance to Waypoint
Water current layer
Global Positioning System Fix Data
Geographic Position - Latitude/Longitude
GNSS fix data
Water temperature
Wind direction and speed
Wind speed and angle
Recommended minimum specific LORAN-C data
Recommended Minimum Navigation Information
Recommended Minimum Specific GNSS Data
Rate of turn
Rudder sensor angle
True heading and status
Dual ground/water speed
AIS VHF data-link message
AIS VHF Data-link Own-vessel report
Course Over Ground and Ground Speed
Time and date
3
3-9