JRC JMA-3300 Series Installation Manual page 115

 Exclusion Satellite Setting
Sets a satellite disabled for use.
1 Open GPS Setting
"Exclusion Satellite" menu appears.
After setting, open "8. Send Data", and send the setting to the GPS receiver.
"Exclusion Satellite1" menu appears.
Inputs the satellite number disabled for use.
Press the cursor key or turn the [MULTI] control to set the satellite number.
The satellite number can be set between 0 and 32.
You can operate the same way for the other settings.
After setting, open "8. Send Data", and send the setting to the GPS receiver.
 GPS Adjust
1 Open GPS Setting
"GPS Adjust" menu appears.
Chapter 4 ADJUST MENU SETTINGS
- Exclusion Satellite .
- GPS Adjust .
4.9 GPS
4
4-49