JRC JMA-3300 Series Installation Manual page 125

 TD1 Correction
Enters the propagation time correction value for the TD value of "Select 1".
1 Open LORAN A
Press the cursor key or turn the [MULTI] control to set the correction value.
The correction value can be set between 0.0 and 9.9 μsec.
 TD2 Correction
Enters the propagation time correction value for the TD value of "Select 2".
1 Open LORAN A
Press the cursor key or turn the [MULTI] control to set the correction value.
The correction value can be set between 0.0 and 9.9 μsec.
 LORAN C
Sets the LORAN C.
1 Open LORAN Setting - LORAN C .
"LORAN C" menu appears.
After setting, open "4. Send Data", and send the setting to the SBAS receiver.
Chapter 4 ADJUST MENU SETTINGS
- TD1 Correction .
- TD2 Correction .
4.9 GPS
4
4-59