JRC JMA-3300 Series Installation Manual page 119

 Beacon Frequency Setting
Sets the Beacon frequency.
This setting is enabled when beacon "Select" is set to "2. Manual".
1 Open Beacon Setting -
"Frequency" menu appears.
Can set the Beacon frequency.
After setting, open "4. Send Data", and send the setting to the Beacon.
 Bit Rate Setting
Sets the Beacon bit rate.
This setting is enabled when beacon "Select" is set to "2. Manual".
1 Open GPS Setting
"Bit Rate" menu appears.
After setting, open "4. Send Data", and send the setting to the Beacon.
Chapter 4 ADJUST MENU SETTINGS
Frequency .
- Fix Mode .
4.9 GPS
4
4-53