JRC JMA-3300 Series Installation Manual page 170

Chapter 4 ADJUST MENU SETTINGS
4.14 ERROR ALARM MASK
 Setting Error Alarm Mask of RX Data
Sets the error alarm of RX data.
Note:
 Do not change the set value carelessly.
If alarm detection is turned off or detection time is changed, be careful
because the alarm may not occur or may be delayed.
Items for the error alarm of RX data
 GYRO
 Compass
 Log
 2Log
 Course/Speed
 Depth
 Temperature
 Wind
 Current
 Rate of Turn
 Rudder
 WPT
 LAT/LON
 Datum
 Status
 HDOP
 AIS
1 Open RX Data - GYRO .
"GYRO" menu appears.
4-104