Default Settings Of Inputs And Outputs - Siemens Sinamics CU240D-2 DP Operating Instructions Manual
Sinamics g120d distributed inverter control unit with encoder evaluation
Hide thumbs
Also See for Sinamics CU240D-2 DP:
- List manual (910 pages) ,
- Operating instructions manual (358 pages) ,
- Getting started manual (68 pages)
Table of Contents
Advertisement
4.2.16
Default settings of inputs and outputs
Default setting 1: "Conveyor system with 2 fixed frequencies"
DO 0: p0730, DO 1: p0731
Fixed speed setpoint 3: p1003, fixed speed setpoint 4: p1004, fixed speed setpoint active: r1024
Speed setpoint (main setpoint): p1070[0] = 1024
DI 4 and DI 5 = high: the inverter adds the two fixed speed setpoints
Default setting 2: "Conveyor system with Basic Safety"
DO 0: p0730, DO 1: p0731
Fixed speed setpoint 1: p1001, fixed speed setpoint 2: p1002, fixed speed setpoint active: r1024
Speed setpoint (main setpoint): p1070[0] = 1024
DI 0 and DI 1 = high: the inverter adds the two fixed speed setpoints.
Converter with the control units CU240D-2
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF
4.2 Electrical Installation
DI 0: r0722.0, ..., DI 5: r0722.5
DI 0: r0722.0, ..., DI 5: r0722.5
Installation
63
Advertisement
Table of Contents
