Table 3-2: Regulation Maximum Eirp - Alvarion BreezeNET B System Manual

Chapter 3 - Commissioning
Country Code
FCC 5.3 GHz
FCC 5.4 GHz
ETSI 5.4 GHz
ETSI-F 5.4 GHz
Australia 5.4 GHz
Universal 5.4 GHz
UK 5.8 GHz
Australia 5.8 GHz
India 5.8 GHz
Germany 5.8 GHz
ETSI 2.4 GHz
NOTE 1 (FCC 5.3 GHZ, 20 MHz Bandwidth):
For full compliance with FCC regulations, the following requirements should be
followed in units using a 20 MHz bandwidth:
In units HW Revision B, if you wish to include frequency channel 5270 MHz in
1
the set of frequencies to be used, then the Transmit Power parameter in the
BU, and the Maximum Tx Power parameter in the RB, should not be set to a
value above "17-Antenna Gain". If there is a need to use a higher value for
these parameters, this frequency should not be used.
In units with HW Revision C, if you wish to include one or more of frequency
2
channels 5270, 5275 and 5330 MHz in the set of frequencies to be used, then
the Transmit Power parameter in the BU, and the Maximum Tx Power
parameter in the RB, should not be set to a value above "20-Antenna Gain". If
there is a need to use a higher value for these parameters, this frequency
should not be used.
BreezeNET B

Table 3-2: Regulation Maximum EIRP

Maximum EIRP (dBm)
30 for 20 and 40 MHz bandwidth,
27 for 10 MHz bandwidth
(NOTES 1, 2, 3)
30 for 20 and 40 MHz bandwidth,
27 for 10 MHz bandwidth
30 for 20 and 40 MHz bandwidth,
27 for 10 MHz bandwidth
30 for 20 and 40 MHz bandwidth,
27 for 10 MHz bandwidth
30 for 20 and 40 MHz bandwidth,
27 for 10 MHz bandwidth
49
36 for 20 and 40 MHz bandwidth,
33 for 10 MHz bandwidth
36
36
36 for 20 and 40 MHz bandwidth,
33 for 10 MHz bandwidth
20 for 20 and 40 MHz bandwidth,
17 for 10 MHz bandwidth
39
Configuring Basic Parameters
System Manual