4 Repair
4.14 Replacement of EPS board DSQC 646 for Electronic Position Switches
4.14 Replacement of EPS board DSQC 646 for Electronic Position Switches
General
An Electronic Position Switches safety controller, EPS board, is mounted if the
option Electronic Position Switches is used.
Location
The EPS board is mounted behind the axis computer.
PMC small:
B
A
xx1000000979
A
B
Continues on next page
184
Note
After replacement of the safety controller, the Electronic Position Switches
configuration must be downloaded to the new safety controller and then validated.
For more information, see Application manual - Electronic Position Switches.
EPS board
Axis computer
© Copyright 2007-2018 ABB. All rights reserved.
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J