Product Description; Handheld Capnograph/Pulse Oximeter - Nellcor NPB-75 Service Manual

Section 1: Introduction
1.3

PRODUCT DESCRIPTION

1-2
The handheld capnograph/pulse oximeter is used to continuously monitor
end-tidal carbon dioxide (EtCO
(SpO ), and pulse rate. The monitor is for attended monitoring only and
2
must be used in the continuous presence of a qualified healthcare
provider. The monitor can be used on adult, pediatric, and infant/neonatal
patients. It is intended for use where continuous, noninvasive monitoring
of these parameters is desired, including hospital and mobile use (when
protected from excessive moisture such as direct rainfall). The monitor
operates on AC power or a rechargeable Nickel Metal Hydride battery
pack.
Figure 1-1: Handheld Capnograph/Pulse Oximeter
The monitor is operated using a four-key keypad. Measurements are
displayed on the front panel on the 7-segment LED digital displays (LED)
and on the LCD graphic display (LCD) as shown in Figure 1-2. Refer to the
operator's manual for complete operating instructions.
Figure 1-2: LCD Graphic Display and 7-Segment Digital Displays
), respiratory rate, oxygen saturation
2