Aiwa NSX-D7 Operating Instructions Manual page 11

USING THE SPICE FUNCTION
[Jsing the scratch mode
SPICE A/B
function
The SPICE A/B function allows you to add percussion to the
playback of the music and create your original sounds.
Your sounds created with SPICE A/B can be recorded on tape if
you want to.
1
1
2
3
4
Press SPICE A.
You'll hear the current sound stored at A,
Within 4 seconds, turn MULTI JOG to select the
desired sound.
As the display changes, you'll hear the respective sound.
In a similar way, select a sound for SPICE B.
Play the music source and hit SPICE A or B in
time with the music as in playing percussion
instruments.
m
The SPICE A/B function cannot be used when making a tape
copy between two tape decks using SYNC DUB.
2
~!
Hold down
SPICE A.
(Don't release the button
until you complete step 2.)
"SCT MODE" is displayed.
2! Still holding down the button, turn MULTI JOG.
Depending on the direction in which you turn MULTI JOG,
different scratches are produced.
The Scratch mode is disabled when you release the A button.
Using
the AUTO SPICE function
The AUTO SPICE function produces the sounds of SPICE A
and B in sync with the music, the sound of A in response to low m
frequency signals, and the sound of B in response to high
frequency signals.
[m
The AUTO SPICE function cannot be used together with the
BEAT function.
Depending on the music, the AUTO SPICE function may not
work the way you'd expect. In such a case, use the SPICE AIB
function instead.
The AUTO SPICE function is not available when making a tape
copy between two tape decks using SYNC DUB.
ENGLISH
10