Aiwa NSX-D7 Operating Instructions Manual page 10

Aiwa compact disc stereo system operating instructions nsx-d7
Hide thumbs Also See for NSX-D7:
Table of Contents

Advertisement

Available languages

Available languages

Using the AUTO mode
The AUTO mode automatically adjusts the tempo of the current
rhythm pattern so it coincides with the tempo of the music.
m
Depending on the music the AUTO mode may not work correctly
(with songs whose tempo is fuzzy, or is varying, for example).
K_'&
You can let the music start playing before performing step 1 or
later at the desired moment.
1
2
3
Press BEAT ON/OFF to switch the function on.
You will hear the current rhythm pattern.
Turn MULTI JOG to select the desired
rhythm
pattern.
Press RHYTHM once while the selected rhythm
pattern
is displayed,
then turn MULTI JOG to
select "AUTO".
While the unit is trying to get synced up to the tempo of the
music, a cascade-like indicator will flash on the sides of the
graphic equalizer display section.
When the unit gets synced up to the tempo of the music, the
display will momentarily read the synced-up tempo.
Depending on sound sources (such as, songs whose tempo
is varying), however, you may see different tempos appearing
one after the other in the display.
After one synced up, if the sync lock unlocks, the display will
read "BEAT OUT", and again the unit will try to get synced up.
At the occurrence of BEAT OUT, the level of the rhythm is
automatically
reduced to "1"; and it increases back to the
preset level when sync is achieved again,
USING THE FILL IN FUNCTION
The FILL IN function is used together with the BEAT function to
insert a variation of the current rhythm pattern.
The AUTO SPICE/FILL IN double function switch takes on the
FILL IN function when the BEAT function is switched On.
m
The AUTO SPICE function is not available at the same time as
the FILL IN function.
The FILL IN function is not available when making a tape copy
between two tape decks using SYNC DUB.
The FILL IN function is not available for the GAME rhythm.
To use the FILL IN function
,>——
.——-.4
I
)1 t
———-————
HI
During playback with the BEAT function switched on, press FILL
IN at the desired moment.
"FILL IN" is displayed and, when the current cycle of the rhythm
pattern is over, you'll hear a shorl sound different from the rhythm
pattern. This sound depends on the selected rhythm patterns.
The BEAT function can be used together with the SPICE AIB
function, as welt as with the FILL IN function. But the AUTO SPICE
function cannot be used at the same time as the BEAT function.
9
ENGLISH

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx-nd7 uSx-wnd7

Table of Contents