Flushing Box - Brother MFC-J3520 Service Manual

9.53 Flushing Box

(1) Release the two Hooks and remove the Flushing box.
Assembling Note: If you replace the flushing box (without replacing the main PCB
Lower cover
ASSY), reset the flushing count, using the procedure given in
Chapter 4, Section 1.14 "Reset purge and flushing counts."
It is also recommended that the ink absorber box be replaced and
the purge count be reset as necessary since the purge count may
approach the upper limit.
Hook
Flushing box
Fig. 3-127
Hook
3-109
Confidential