9.62 T1 Paper Pull-in Roller
(1) Remove the two screws (TAPTITE CUP B M3x10) and remove the DX chute.
Note: Be careful not to lose the Gear shown in the figure.
TAPTITE CUP B M3x10
Lower cover
<Front>
(2) Release the four Hooks and remove the Paper pull-in roller holder from the DX chute.
Paper pull-in roller holder
2a
Hook
DX chute
Fig. 3-151
2b
Fig. 3-152
3-125
TAPTITE CUP B M3x10
<Rear>
Gear
Gear
Hooks
Hook
DX chute
Confidential