Paper Feed Motor - Brother MFC-J3520 Service Manual

9.56 Paper Feed Motor

(1) Remove the two screws (SCREW BIND M3x6) from the CR guide rail.
(2) Remove the two screws (TAPTITE CUP B M3x10) from the CR guide rail.
(3) Remove the two CR guide rail springs and remove the CR guide rail.
TAPTITE CUP B M3x10
CR guide rail
<Rear>
Note: Do not place the removed CR guide rail with the Recording paper holder down.
Wrong
Correct
Recording paper holder
CR guide rail spring
Fig. 3-135
CR guide rail
Fig. 3-136
3-114
<Front>
CR guide rail spring
SCREW BIND M3x6
Recording paper holder
CR guide rail
Confidential