Replacing The Internal Speaker - IBM ThinkCentre 8105 Hardware Replacement Manual

10. Reinstall the PCI riser into the system board.
11. Go to "Completing the parts replacement" on page 26.

Replacing the internal speaker

This section provides instructions on how to replace the internal speaker.
5. Pull upward on the blue handle 1 to remove the PCI riser from the
computer.
6. Pivot the adapter latch upward and remove the failing adapter.
7. Remove the new adapter from its static-protective package.
8. Install the new adapter into the expansion connector in the PCI riser.
9. Pivot the adapter latch down to retain the adapter.
Attention
Do not open your computer or attempt any repair before reading the "Important safety
information" in the Quick Reference that was included with your computer or in the
Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Quick
Reference or HMM, go to http://www.ibm.com/pc/support/.
Chapter 2. Replacing hardware
23