Cleaning The Injector; Cleaning The Refill Controller - Pentair Autotrol 255 Installer Manual
Hide thumbs
Also See for Autotrol 255:
- Operation manual (23 pages) ,
- Service manual (20 pages) ,
- Installer manual (64 pages)
Table of Contents
Advertisement
Installer Manual 255/LOGIX 742-762-764 - Maintenance
9.4.2. Cleaning the injector
No.
A
Using a Torx key, unscrew and remove the injector cap (4).
Caution
Take care not to damage the injector (5).
B
Using pliers, gently extract the injector (5) from valve body.
C
Clean the injector (5) using compressed air, a soft brush or possibly a pin.
9.4.3. Cleaning the refill controller
No.
A
Using a Torx key, unscrew and extract the refill controller (3).
Clean the refill controller (3) with a soft brush.
B
Make sure the refill controller groove is perfectly clean.
C
Check for O-rings integrity.
D
Check for ball (2) integrity (if present).
E
Clean the refill controller chamber (1) before reinserting the refill controller (3).
70 / 92
Operation
Operation
Ref. MKT-IM-021 / A - 20.02.2019
Advertisement
Table of Contents
