Disassembling Valve From Tank - Pentair Autotrol 255 Installer Manual

9.4.7. Disassembling valve from tank

f
No.
Tip
Depending on the maintenance required, it may be useful to disassemble the valve from the
tank in order to have easier access.
A Unlock the cover (1) from the slide clips (2) (one on each side of the valve).
B Lift the cover (1).
Using a Phillips screwdriver unscrew the screw (7) from the locking bar (6), so that the
C
locking bar (6) can be slid out of its position.
You can now lift the top of the valve body (3) from the tank adapter (5), so as to perform all
D required maintenance operations with the upper valve body (3) part on a workbench.
Take care with the seals (4) on the valve body bosses.
Ref. MKT-IM-021 / A - 20.02.2019
Installer Manual 255/LOGIX 742-762-764 - Maintenance
Operation
73 / 92